Siemens FC300 - HMI menu structure; Main menu

HMI menu structure
D
How to read the tables
In the following tables the menus are entered in bold text and the parameters in
italic .
The first table shows the main HMI menu, that is HMI menu levels 1 and 2. The following tables
show the HMI submenus, that is HMI menu levels 3 to 5.
The visibility of some parameter/menu items depends on previous selections. For example, if
Frequency is selected on the output, only the frequency setup parameter/menu items are
visible, and the current, pulse, and status output setup parameter/menu items are hidden.
D.1 Main menu
In the following table only the menus and parameters of the first two levels of the HMI menu
structure are listed.
Table D-1 Main menu
Level 1 Level 2 More information
No. Name No. Name
1 Quick Start 1.1 Quick Commissioning Quick Commissioning wizard (menu
item 1.1) (Page 96)
1.2 Zero Point Adjustment Zero Point Adjustment wizard (menu
item 1.2) (Page 99)
1.3 Process Values Process Values wizard (menu item 1.3)
(Page 102)
1.4 Inputs and outputs Inputs/Outputs wizard (menu item 1.4)
(Page 103)
1.5 Gas Application Gas Application wizard (menu item 1.5)
(Page 107)
1.6 Pulsating Flow Pulsating Flow wizard (menu item 1.6)
(Page 108)
1.7 Dosing Application Dosing Application wizard (menu item
1.7) (Page 109)
1.8 Copy configuration Table D-19 Maintenance Mainte‐
nance (Page 505)
1.9 Communication Menu item 4: Communication
(Page 512)
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 481