Siemens FC300 - Process; Pressure Drop Curves

Description Specification
Relative humidity [%] 95
EMC performance EN/IEC 61326-1 (Industry)
* Display can be unreadable below -20°C
Table 11-26 Cleaning and sterilizing conditions
Description Specification
Cleaning method
● CIP
● SIP
11.8 Process
11.8.1 Pressure drop curves
The pressure drop is dimension-dependent and influenced by process media viscosity and
density. Sensors with undersized process connections experience higher pressure drop due
to reduction in inlet/outlet dimensions.
Note
Pressure drop information
Pressure drop information is available on request.
Technical data
11.8 Process
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 235