Siemens FC300 - Date and Time

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
2.5.9.7.2 Duration time Define the supervision time. An
alarm is raised and valve(s)
closed if dosing time is excee‐
ded.
3600 1 to 360000 User
2.5.9.7.3 Overrun mode Enable or disable dosing
amount supervision. An alarm is
raised and valve(s) closed if dos‐
ing amount is exceeded.
Off
● Off
● On
User
2.5.9.7.4 Overrun value Define the dosing overrun
amount. An alarm is raised and
valve(s) closed if dosing amount
is exceeded.
0 User
B.7 Date and time
Table B-22 Date and time
HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
2.7.1 Current date & time Show actual date and time of the
device. This date and time is
used for all timestamps of log‐
ged information.
User
2.7.2 Set date and time Set current date and time of the
device. This date and time is
used for all timestamps of log‐
ged information
User
Default settings
B.7 Date and time
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 403