Siemens FC300 - Sensor Dimension Dependent Default Settings (Inputs;Outputs)

A.1.1 Sensor dimension dependent default settings (Inputs/Outputs)
Table A-1 Current output (channel 1)
Sensor dimension Default value Unit Range
Upper scaling
DN 15 Mass flow 1.768 kg/s -8.84 to +8.84
Volume flow 0.0000336 m
3
/s -0.005 to +0.005
DN 25 Mass flow 4.9 kg/s -24.5 to +24.5
Volume flow 0.000098 m
3
/s -0.015 to +0.015
DN 50 Mass flow 19.64 kg/s -98.2 to +98.2
Volume flow 0.0003928 m
3
/s -0.059 to +0.059
DN 80 Mass flow 50.2 kg/s - 251 to +251
Volume flow 0.001004 m
3
/s -0.249 to +0.249
DN 100 Mass flow 19.64 kg/s -98.2 to +98.2
Volume flow 0.0003928 m
3
/s -0.059 to +0.059
DN 150 Mass flow 50.2 kg/s - 251 to +251
Volume flow 0.001004 m
3
/s -0.249 to +0.249
Lower scaling
DN 15 Mass flow 0 kg/s -8.84 to +8.84
Volume flow 0 m
3
/s -0.005 to +0.005
DN 25 Mass flow 0 kg/s -24.5 to +24.5
Volume flow 0 m
3
/s -0.015 to +0.015
DN 50 Mass flow 0 kg/s -98.2 to +98.2
Volume flow 0 m
3
/s -0.059 to +0.059
DN 80 Mass flow 0 kg/s - 251 to +251
Volume flow 0 m
3
/s -0.249 to +0.249
DN 100 Mass flow 19.64 kg/s -98.2 to +98.2
Volume flow 0.0003928 m
3
/s -0.059 to +0.059
DN 150 Mass flow 50.2 kg/s - 251 to +251
Volume flow 0.001004 m
3
/s -0.249 to +0.249
Table A-2 Signal output (channels 2, 3 and 4)
Sensor dimension Default value Unit Range
Upper scaling
DN 15 Mass flow 1.768 kg/s -8.84 to +8.84
Volume flow 0.00003536 m
3
/s -0.005 to +0.005
Standard volume flow 0.00003536 normal m³/s -0.005 to +0.005
DN 25 Mass flow 4.9 kg/s -24.5 to +24.5
Volume flow 0.000098 m
3
/s -0.015 to +0.015
Standard volume flow 0.000098 normal m³/s -0.015 to +0.015
Technical reference
A.1 Sensor dimension dependent default settings
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 269