Siemens FC300 - Menu item 2.3: Totalizer

D.4 Menu item 2.3: Totalizer
Table D-4 Totalizers
Level 3 Level 4 Level 5
No. Name No. Name No. Name
2.3.1 Totalizer 1 2.3.1.1 Process value
2.3.1.2 Unit
2.3.1.3 Custom units
2.3.1.4 Custom conversion factor
2.3.1.5 Decimal places
2.3.1.6 Flow direction
2.3.1.7 Fail safe behaviour
2.3.1.8 Reset
2.3.1.9 Preset
2.3.1.10 Alarm and warning limits 2.3.1.10.1 Upper alarm limit
2.3.1.10.2 Upper warning limit
2.3.1.10.3 Lower warning limit
2.3.1.10.4 Lower alarm limit
2.3.1.10.5 Hysteresis
2.3.2 Totalizer 2 2.3.2.1 Process Value
2.3.2.2 Unit
2.3.2.3 Custom units
2.3.2.4 Custom conversion factor
2.3.2.5 Decimal places
2.3.2.6 Flow direction
2.3.2.7 Fail safe behaviour
2.3.2.8 Lower Limit Alarm
2.3.2.9 Alarm Hysteresis
2.3.2.10 Reset
2.3.2.11 Preset
2.3.2.10 Alarm and warning limits 2.3.2.10.1 Upper alarm limit
2.3.2.10.2 Upper warning limit
2.3.2.10.3 Lower warning limit
2.3.2.10.4 Lower alarm limit
2.3.2.10.5 Hysteresis
HMI menu structure
D.4 Menu item 2.3: Totalizer
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 487