4.2.2.1 Remote transmitter mounting
Mounting on wall
1. Prepare holes with aid of mounting bracket, see Mounting bracket (Page 257).
2. Fasten mounting bracket with black cushion pad to wall (torque 10 Nm).
Mounting on pipe
1. Mount mounting bracket with cushion pad on pipe using fastening brackets/U-bolts and
supplied pipe adaptor. Note: U-bolts and other miscellaneous hardware are not supplied
with the flowmeter.
2. Tighten nuts (torque: 10 Nm).
Note
Hygienic applications
If the device is wall or pipe-mounted in a hygienic application, always use domed nuts.
Installing/mounting
4.2 Installation instructions
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 51
To Next Page
Loading...
