Siemens FC300 - Sensorflash

Description Specification
MASS 2100
ATEX Certificate : DEMKO 03 ATEX 135252X
Sitrans FC MASS 2100 can be used in zone 0, 20
Ex ia IIC T6…T3 Ga
Ex ia IIIC T135°C…T180°C Da
IECEx Certificate : IECEx ULD 17.0029
Sitrans FC MASS 2100 can be used in zone 0, 20
Ex ia IIC T6…T3 Ga
Ex ia IIIC T135°C…T180°C Da
Canada Certificate. UL E232147
Sitrans FC MASS 2100 can be used in zone 0, 20
and Class I+II+III Division 1. Grp. A,B,C,D, E, F, G
Class I+II+III Division 1. Grp. A,B,C,D, E, F, G.
Ex ia IIC T6…T3 Ga
Ex ia IIIC T135°C…T180°C Da
US Certifikate: UL E232147
Sitrans FC MASS 2100 can be used in zone 0 and
Class I Division 1.
Class I+II+III Division 1. Grp. A,B,C,D, E, F, G.
AEx ia IIC T6…T3 Ga
AEx ia IIIC T135°C…T180°C Da
Pressure equipment 2014/68/EU Pressure Equipment Directive (PED)
Canadian Registration Number (CRN)
11.11 SensorFlash
Table 11-29 SensorFlash
Description Specification
SD card
Capacity 4 GB
File system support FAT32 / 8.3
Temperature range
Operation:
Storage:
-40 to +85 °C (-40 to 185 °F)
-40 to +100 °C (-40 to 212 °F)
Note
SensorFlash functions support
Only the supplied 4 GB SD cards are supported for backup, restore, logging, and firmware
update.
Technical data
11.11 SensorFlash
MASS 2100 & FC300 (FCT030)
240 Operating Instructions, 06/2017, A5E39789040-AA