Siemens FC300 - Construction

The following examples describe the pulse functionalities for channel 2 and 3 in redundancy
mode:
Channel 2 configured as positive direction and channel 3 set to redundancy mode 90°


Figure 11-2 Positive flow - channel 3 leads by 90°


Figure 11-3 Negative flow - channel 3 lags by 90°
Channel 2 configured as positive direction and channel 3 set to redundancy mode 180˚


Figure 11-4 Positive flow - channel 3 leads by 180°


Figure 11-5 Negative flow - channel 3 lags by 180°
11.6 Construction
Table 11-17 Designated use
Description Specification
Measurement of process medium
● Fluid Group 1 (suitable for dangerous fluids)
● Aggregate state: Paste/light slurry, liquid and gas
Technical data
11.6 Construction
MASS 2100 & FC300 (FCT030)
230 Operating Instructions, 06/2017, A5E39789040-AA