Siemens FC300 - Menu item 2.2: Process values

D.3 Menu item 2.2: Process values
Table D-3 Process values
Level 3 Level 4 Level 5
No. Name No. Name No. Name
2.2.1 Mass flow 2.2.1.1 Units
2.2.1.2 Custom units
2.2.1.3 Custom conversion factor
2.2.1.4 Decimal places
2.2.1.5 Low flow cut-off
2.2.1.6 Alarm and warning limits 2.2.1.6.1 Upper alarm limit
2.2.1.6.2 Upper warning limit
2.2.1.6.3 Lower warning limit
2.2.1.6.4 Lower alarm limit
2.2.1.6.5 Hysteresis
2.2.1.7 Flow adjustment 2.2.1.7.1 Adjustment factor
2.2.2 Volume flow 2.2.2.1 Units
2.2.2.2 Custom units
2.2.2.3 Custom conversion factor
2.2.2.4 Decimal places
2.2.2.5 Low flow cut-off
2.2.2.6 Alarm and warning limits 2.2.2.6.1 Upper alarm limit
2.2.2.6.2 Upper warning limit
2.2.2.6.3 Lower warning limit
2.2.2.6.4 Lower alarm limit
2.2.2.6.5 Hysteresis
HMI menu structure
D.3 Menu item 2.2: Process values
MASS 2100 & FC300 (FCT030)
484 Operating Instructions, 06/2017, A5E39789040-AA