Siemens FC300 - Page 485

Level 3 Level 4 Level 5
No. Name No. Name No. Name
2.2.3 Standard Volumeflow 2.2.3.1 Units
2.2.3.2 Custom units
2.2.3.3 Custom conversion factor
2.2.3.4 Decimal places
2.2.3.5 Alarm and warning limits 2.2.3.5.1 Upper alarm limit
2.2.3.5.2 Upper warning limit
2.2.3.5.3 Lower warning limit
2.2.3.5.4 Lower alarm limit
2.2.3.5.5 Hysteresis
2.2.3.6 Standard density 2.2.3.6.1 Unit
2.2.3.6.2 Standard volume flow
mode
2.2.3.6.3 Fixed standard density
2.2.3.6.4 Linear expansion coeff.
2.2.3.6.5 Square expansion coeff.
2.2.3.6.6 Standard temperature
2.2.3.6.7 Upper alarm limit stand‐
ard density
2.2.3.6.8 Upper alarm limit stand‐
ard density
2.2.3.6.9 Lower alarm limit stand‐
ard density
2.2.3.6.10 Lower alarm limit stand‐
ard density
2.2.3.6.11 Alarm hysteresis stand‐
ard density
2.2.5 Density 2.2.5.1 Units
2.2.5.2 Custom units
2.2.5.3 Custom conversion factor
2.2.5.4 Decimal places
2.2.5.5 Alarm and warning limits 2.2.5.5.1 Upper alarm limit
2.2.5.5.2 Upper warning limit
2.2.5.5.3 Lower warning limit
2.2.5.5.4 Lower alarm limit
2.2.5.5.5 Hysteresis
2.2.5.6 Density adjustment 2.2.5.6.1 Adjustment Factor
2.2.5.6.3 Fraction offset
2.2.5.7 Empty tube detection
2.2.5.8 Empty tube limit
HMI menu structure
D.3 Menu item 2.2: Process values
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 485