Siemens FC300 - Page 486

Level 3 Level 4 Level 5
No. Name No. Name No. Name
2.2.6 Medium temperature 2.2.6.1 Units
2.2.6.2 Decimal places
2.2.6.3 Alarm and warning limits 2.2.6.5.1 Upper alarm limit
2.2.6.5.2 Upper warning limit
2.2.6.5.3 Lower warning limit
2.2.6.5.4 Lower alarm limit
2.2.6.5.5 Hysteresis
2.2.7 Fraction 2.2.7.1 Measurement Mode
2.2.7.2 Unit
2.2.7.3 Active fraction table
2.2.7.4 Fraction Name
2.2.7.5 Fraction A 2.2.7.5.1 Fraction A label
2.2.7.5.2 Upper Limit Alarm
2.2.7.5.3 Upper Limit Warning
2.2.7.5.4 Lower Limit Warning
2.2.7.5.5 Lower Limit Alarm
2.2.7.5.6 Alarm Hysteresis
2.2.7.5.7 Decimal Places
2.2.7.6 Fraction B 2.2.7.6.1 Fraction B label
2.2.7.6.2 Upper Limit Alarm
2.2.7.6.3 Upper Limit Warning
2.2.7.6.4 Lower Limit Warning
2.2.7.6.5 Lower Limit Alarm
2.2.7.6.6 Alarm Hysteresis
2.2.7.6.7 Decimal Places
2.2.7.7 Fraction A % 2.2.7.7.1 Upper Limit Alarm
2.2.7.7.2 Upper Limit Warning
2.2.7.7.3 Lower Limit Warning
2.2.7.7.4 Lower Limit Alarm
2.2.7.7.5 Alarm Hysteresis
2.2.7.7.6 Decimal Places
2.2.7.8 Fraction B % 2.2.7.8.1 Upper Limit Alarm
2.2.7.8.2 Upper Limit Warning
2.2.7.8.3 Lower Limit Warning
2.2.7.8.4 Lower Limit Alarm
2.2.7.8.5 Alarm Hysteresis
2.2.7.8.6 Decimal Places
2.2.7.9 Fraction Adjustment 2.2.7.9.1 Adjustment Factor
2.2.7.9.2 Fraction offset
HMI menu structure
D.3 Menu item 2.2: Process values
MASS 2100 & FC300 (FCT030)
486 Operating Instructions, 06/2017, A5E39789040-AA