Level 1 Level 2 More information
No. Name No. Name
2 Setup 2.1 Sensor Menu item 2.1: Sensor (Page 483)
2.2 Process values Menu item 2.2: Process values
(Page 484)
2.3 Totalizer Menu item 2.3: Totalizer (Page 487)
2.4 Inputs and outputs Menu item 2.4: Inputs and outputs
(Page 488)
2.5 Dosing Menu item 2.5: Dosing (Page 495)
2.7 Date and time Menu item 2.7: Date and time
(Page 500)
2.8 Local display Menu item 2.8: Local display (Page 501)
3 Maintenance & Diagnostics 3.1 Identification Menu item 3.1: Identification (Page 503)
3.2 Diagnostic events Menu item 3.2: Diagnostic events
(Page 504)
3.3 Maintenance Menu item 3.3: Maintenance (Page 505)
3.4 Diagnostics Menu item 3.4: Diagnostics (Page 505)
3.5 Peak values Menu item 3.5: Peak values (Page 507)
3.6 Charateristics Menu item 3.6: Characteristics
(Page 507)
3.7 Sensor flash Menu item 3.7: SensorFlash (Page 508)
3.8 Simulation Menu item 3.8: Simulation (Page 510)
3.9 Audit trail Menu item 3.9: Audit trail (Page 511)
3.10 Self test Menu item 3.10: Self test (Page 511)
3.11 Resets Menu item 3.11: Resets (Page 512)
3.12 Firmware update Menu item 3.12: Firmware update
(Page 512)
4 Communication
4.1 USB (Service channel)
4.2 HART (channel 1)
4.3 Modbus (channel 1)
4.4 Profibus DP/PA
5 Security 5.1 Change user PIN Menu item 5.1: Change User PIN
5.2 Change expert PIN Menu item 5.1: Change expert
5.3 Recovery ID Menu item 5.1: Recovery ID
5.4 PIN recovery Menu item 5.1: PIN recovery
5.5 Activate user PIN Menu item 5.1: Activate user PIN
5.6 Deactivate user PIN Menu item 5.1: Deactivate user PIN
5.7 Auto logout Menu item 5.1: Auto logout
5.8 Logout Menu item 5.1: Logout
6 Language
See also
Inputs/Outputs wizard (menu item 1.4) (Page 103)
HMI menu structure
D.1 Main menu
MASS 2100 & FC300 (FCT030)
482 Operating Instructions, 06/2017, A5E39789040-AA
To Next Page
Loading...
