Siemens FC300 - Page 423

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
3.1.15.4 Order number Replacement transmitter order
number (MLFB). Also shown on
the device nameplate.
Read
only
3.1.15.5 Comm. Interface HW
version
Comm. interface HW version Read
only
Table B-32 Local display
HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
3.1.16.1 HW version Local display hardware version. Read
only
3.1.16.2 FW version Local display firmware version. Read
only
3.1.16.3 HMI cfg. version HMI configuration file Read
only
3.1.16.4 Order number Replacement transmitter order
number (MLFB). Also shown on
the device nameplate.
Read
only
Table B-33 Diagnostic events
HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
3.2.1 Active diagnostic events Active diagnostic events
3.2.2 Diagnostic log Diagnostic log
3.2.3 Clear diagnostic log Clear diagnostic log
3.2.4 Acknowledge mode Select manual or automatic ac‐
knowledge of alarms. Manual:
Acknowledge in alarm list view.
Automatic: when cause is gone.
Auto
● Manual
● Auto
3.2.5 Transmitter detailed
events
Transmitter detailed events
● DE10
● DE11
● DE12
● DE21
● DE22
● DE23
● DE24
● DE26
● DE27
● DE28
● DE29
● DE30
● DE31
Default settings
B.9 Maintenance and diagnostics
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 423