Siemens FC300 - Page 421

HMI menu ID Parameter Description Default value
[unit]
value range Access
level
2.8.10.7 5th value Select the fifth value for the view. Totalizer 1
● Mass flow
● Volume flow
● Standard
volume flow
● Density
● Medium
temperature
● Fraction A
● Fraction B
● Fraction A %
● Fraction B %
User
2.8.10.8 6th value Select the sixth value for the
view.
Mass flow
● Mass flow
● Volume flow
● Standard
volume flow
● Density
● Medium
temperature
● Sensor frame
temperature
● Standard
volume flow
● Fraction A
● Fraction B
● Fraction A %
● Fraction B %
User
2.8.10.9 Graph Scale Mode Select the scaling mode. Auto‐
matic scaling or fixed scaling us‐
ing “Graph Scale Lower Limit”
and “Graph Scale Upper Limit”.
Auto
● Auto
● Fixed
User
2.8.10.10 Graph log time window Select the logging period (time
axis length).
5 min
● 1 min
● 5 min
● 15 min
● 30 min
● 1 h
● 2 h
● 3 h
User
2.8.10.11 Graph Scale Lower Limit Define the scaling upper limit of
the value axis for fixed mode.
0 User
2.8.10.12 Graph Scale Upper Limit Define the scaling lower limit of
the value axis for fixed mode.
0 User
2.8.11 Status icons Select the set of status icons for
diagnostic events.
Standard Standard
NAMUR
User
Default settings
B.8 Local display
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 421