Siemens FC300 - Page 202

ID/
Icons
Diagnostic Action Comment
166 Standard volume flow Value simulated. Disable 'Simulation' before re‐
turning to normal operation
Only hydrocarbon
167 Totalizer 1 Value simulated. Disable 'Simulation' before re‐
turning to normal operation
168 Totalizer 2 Value simulated. Disable 'Simulation' before re‐
turning to normal operation
169 Totalizer 3 Value simulated. Disable 'Simulation' before re‐
turning to normal operation
170 Loop current Loop current simulated. Disable 'Simulation' be‐
fore returning to normal operation
Only HART devices
172 Transmitter FW invalid. A component does not have the ex‐
pected FW version. Start a product firmware
update to update the component version or re‐
place the component.
173 Sensor FW invalid. A component does not have the ex‐
pected FW version. Start a product firmware
update to update the component version or re‐
place the component.
174 Display FW invalid. A component does not have the ex‐
pected FW version. Start a product firmware
update to update the component version or re‐
place the component.
175 IO FW invalid. A component does not have the ex‐
pected FW version. Start a product firmware
update to update the component version or re‐
place the component.
Diagnosing and troubleshooting
10.2 Fault codes and corrective actions
MASS 2100 & FC300 (FCT030)
202 Operating Instructions, 06/2017, A5E39789040-AA