Siemens FC300 - Page 247

DN Temperature TS (°C)
-40 to +38 180
4 130 124
6 226 217
15 130 124
Table 11-32 ASME B16.5 [bar]
Class /
Group
Temperature TS (°C)
-50 0 50 100 150 200
150 / 2.2 19 19 18.4 16.2 14.8 13.7
300 / 2.2 49.6 49.6 48.1 42.2 38.5 35.7
600 / 2.2 99.3 99.3 96.2 84.4 77.0 71.3
Table 11-33 DIN 11851 [bar]
PN (bar) / DN Temperature TS (°C)
-50 0 50 100 140
25 / 50-100 25 25 25 25 25
40 / 10-40 40 40 40 40 40
Table 11-34 DIN 32676 & ISO 2852 [bar]
PN (bar) / DN Temperature TS (°C)
-50 0 50 100 140
10 / 85-219.1 10 10 10 10 10
16 / 48.3-76.2 16 16 16 16 16
25 / 6.35-42.4 25 25 25 25 25
Table 11-35 DIN 11864 & ISO 2853 [bar]
PN (bar) / DN Temperature TS (°C)
-50 0 50 100 140
25 / 50-100 25 25 25 25 25
40 / 10-40 40 40 40 40 40
Note
Test pressure
Maximum allowable test pressure (MATP) for the flowmeter and process connection is 1.5
times the nominal pressure up to 150 bar (2176 psi).
Technical data
11.13 Pressure - temperature ratings
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 247