Siemens FC300 - Page 260

Sensor type Sensor size Default value Unit: Kg/s
MASS2100 6 -0,353
15 -2,209
Sensor type Sensor size Default value Unit: Kg/s
Alarm Hysteresis
FC400 DN 15 0
DN 25 0
DN 50 0
DN 80 0
DN 100 0
DN 150 0
MASS2100 1 0
1.5 0
2.1 0
3 0
FC300 DN4 HP 2 0
FC300 DN4 C22 3 0
FC300 DN4 316 3.5 0
MASS2100 6 0
15 0
Low Flow Cut-off Kg/s Kg/h
FC400 DN 15 0,0103 37
DN 25 0,0319 115
DN 50 0,144 520
DN 80 0,378 1360
DN 100 0,783 2820
DN 150 1,269 4570
MASS2100 1 0,0000272 0,0980
1.5 0,0000542 0,195
2.1 0,000117 0,42
3 0,000250 0,90
FC300 DN4 HP 2 0,0000972 0,35
FC300 DN4 C22 3 0,000264 0,95
FC300 DN4 316 3.5 0,000389 1,4
MASS2100 6 0,00139 5
15 0,0106 38
Technical reference
A.1 Sensor dimension dependent default settings
MASS 2100 & FC300 (FCT030)
260 Operating Instructions, 06/2017, A5E39789040-AA