Siemens FC300 - Page 301

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
pickup
amplitude
● 55
Malfunction is
sensor driver
● 56
Malfunction is
sensor driver
● 57
Malfunction is
sensor driver
● 58 Unstable
driver
oscillation
● 59 Mass flow
out of
specification
● 60 Volume
flow out of
specification
● 61 Density out
of
specification
● 62 Media
temp. below
limit
● 63 Media
temp. above
limit
Default settings
B.5 Inputs and outputs
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 301