Siemens FC300 - Page 306

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
● 126 Fract. B
flow below
warning limit
● 127 Fract. B
flow below
alarm limit
2.4.2.8.5 Process alarms (2) Select one or more Individual
alarms. The output is active
when one of the Individual
alarms occurs.
● 128 Ref.
density above
alarm limit
● 129 Ref.
density above
warning limit
● 130 Ref.
density below
warning limit
● 131 Ref.
density below
alarm limit
● 132 Std.
vol. above
alarm limit
● 133 Std. vol.
above
warning limit
● 134 Std. vol.
below warning
limit
● 135 Std.
vol. below
alarm limit
User
Default settings
B.5 Inputs and outputs
MASS 2100 & FC300 (FCT030)
306 Operating Instructions, 06/2017, A5E39789040-AA