Transmitter exploded view
① Display cover ⑫ Transmitter housing
② Local display (HMI) ⑬ Terminal space
③ Connector for HMI ⑭ Power supply terminal protection cover
④ SD card (SensorFlash) ⑮ Lid for terminal connections
⑤ DIP switch (for custody transfer) ⑯ Wiring tool
⑥ DIP switch (for HART and Modbus) ⑰ I/O cassette (optional)
⑦ HMI port ⑱ I/O configuration keys (optional)
⑧ USB service port ⑲a M12 socket
⑨ Transmitter cassette ⑲b Terminal housing
⑩ Heatsink cover for power supply module ⑳a Sensor module (compact version)
⑪ Cable entry ⑳b Barrier module (remote version)
Figure 3-4 Transmitter exploded view
Description
3.3 Design
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 31
To Next Page
Loading...
