Siemens FC300 - Page 310

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
2.4.2.8.13 Simulation alarms (1) Select one or more Individual
alarms. The output is active
when one of the Individual
alarms occurs.
● 160 Mass flow
simulated
● 161 Volume
flow simulated
● 162 Density
simulated
● 163 Medium
temp.
simulated
● 164 Fraction
simulated
● 166 Std.
volume flow
simulated
● 167 Totalizer
1 simulated
● 168 Totalizer
2 simulated
● 169 Totalizer
3 simulated
● 170 Loop
current
simulated
User
2.4.2.8.14 Simulation alarms (2) Select one or more Individual
alarms. The output is active
when one of the Individual
alarms occurs.
● 288 Frame
temperature
simulated
● 298 Std.
volume flow
simulated
User
2.4.2.8.15 Alarm class Select one or more Siemens
alarm classes. The output is ac‐
tive when alarm in selected
alarm class occurs.
Alarm class
● Maintenance
alarm
● Function
check
● Process value
alarm
● Process value
warning
● Maintenance
demanded
● Maintenance
required
● None
User
Default settings
B.5 Inputs and outputs
MASS 2100 & FC300 (FCT030)
310 Operating Instructions, 06/2017, A5E39789040-AA