Siemens FC300 - Page 405

HMI menu ID Parameter Description Default value
[unit]
value range Access
level
2.8.4.1 Damping value Define the damping filter time
constant.
1.0 s 0.0 to 100 s
2.8.4.2 values (1) Select the values which shall be
filtered for the local display.
● Mass flow
● Volume flow
● Standard
volume flow
● Density
● Medium
temperature
● Standard
Volume flow
● Fraction A
● Fraction B
● Fraction A %
● Fraction B %
● Dosing
Table B-24 View 1
HMI menu ID Parameter Description Default value
[unit]
value range Access
level
2.8.5.1 View Select the view type. Three values
● Single value
● Three values
● One value and
bargraph
● One value and
graph
● Six values
● Six diagnostic
values
User
2.8.5.2 1st value Select the first value for the view. Mass flow
● Mass flow
● Volume flow
● Standard
volume flow
● Density
● Medium
temperature
● Fraction A
● Fraction B
● Fraction A %
● Fraction B %
User
Default settings
B.8 Local display
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 405