Siemens FC300 - Page 411

HMI menu ID Parameter Description Default value
[unit]
value range Access
level
2.8.6.11 Graph Scale Lower Limit Define the scaling upper limit of
the value axis for fixed mode.
0 User
2.8.6.12 Graph Scale Upper Limit Define the scaling lower limit of
the value axis for fixed mode.
0 User
Table B-26 View 3
HMI menu ID Parameter Description Default value
[unit]
value range Access
level
2.8.7.1 Enable or disable Select whether the view is visi‐
ble.
Enabled
● Disable
● Enabled
User
2.8.7.2 View Select the view type. One value and
bargraph
● Single value
● Three values
● One value and
bargraph
● One value and
graph
● Six values
● Six Diagnostic
values
● Alarm List
● Totalizer
● Dosing
User
2.8.7.3 1st value Select the first value for the view. Medium temper‐
ature
● Mass flow
● Volume flow
● Standard
volume flow
● Density
● Medium
temperature
● Fraction A
● Fraction B
● Fraction A %
● Fraction B %
User
Default settings
B.8 Local display
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 411