Siemens FC300 - Page 414

Table B-27 View 4
HMI menu ID Parameter Description Default value
[unit]
value range Access
level
2.8.8.1 Enable or disable Select whether the view is visi‐
ble.
Enabled
● Disable
● Enabled
User
2.8.8.2 View Select the view type. Six values
● Single value
● Three values
● One value and
bargraph
● One value and
graph
● Six values
● Six Diagnostic
values
User
2.8.8.3 1st value Select the first value for the view. Volume flow
● Mass flow
● Volume flow
● Standard
volume flow
● Density
● Medium
temperature
● Fraction A
● Fraction B
● Fraction A %
● Fraction B %
User
2.8.8.4 2nd value Select the second value for the
view.
Density
● Mass flow
● Volume flow
● Standard
volume flow
● Density
● Medium
temperature
● Sensor frame
temperature
● Standard
volume flow
● Fraction A
● Fraction flow
Medium B
● Fraction A %
● Fraction B %
User
Default settings
B.8 Local display
MASS 2100 & FC300 (FCT030)
414 Operating Instructions, 06/2017, A5E39789040-AA