Siemens FC300 - Page 463

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
3.8.3.2.9 Device alarms Simulate single or multiple
alarms. Select from alarm list
● 148 Transm.
Temp. above
alarm limit
● 149 Transm.
Temp. below
alarm limit
● 150 Sensor
signal
disrupted
● 159 Internal
error in
transmitter
User
3.8.3.2.10 Channel 1 alarms Simulate single or multiple
alarms. Select from alarm list
Process value
Alarm
● 153 CH1 loop
cur. In lower
saturation
● 154 CH1 loop
cur. In upper
saturation
● 155 CH1 loop
current
deviation
158 CH 1 cable
break
User
Default settings
B.9 Maintenance and diagnostics
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 463