Siemens FC300 - Page 473

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
4.3.8.19 Target register 9 Register of an existing product
parameter which the Modbus re‐
quest is redirected to.
65535 0 to 65535 User
4.3.8.20 Source register 10 Requested register communica‐
ted via Modbus.
65535 0 to 65535 User
4.3.8.21 Target register 10 Register of an existing product
parameter which the Modbus re‐
quest is redirected to.
65535 0 to 65535 User
4.3.8.22 Source register 11 Requested register communica‐
ted via Modbus.
65535 0 to 65535 User
4.3.8.23 Target register 11 Register of an existing product
parameter which the Modbus re‐
quest is redirected to.
65535 0 to 65535 User
4.3.8.24 Source register 12 Requested register communica‐
ted via Modbus.
65535 0 to 65535 User
4.3.8.25 Target register 12 Register of an existing product
parameter which the Modbus re‐
quest is redirected to.
65535 0 to 65535 User
4.3.8.26 Source register 13 Requested register communica‐
ted via Modbus.
65535 0 to 65535 User
4.3.8.27 Target register 13 Register of an existing product
parameter which the Modbus re‐
quest is redirected to.
65535 0 to 65535 User
4.3.8.28 Source register 14 Requested register communica‐
ted via Modbus.
65535 0 to 65535 User
4.3.8.29 Target register 14 Register of an existing product
parameter which the Modbus re‐
quest is redirected to.
65535 0 to 65535 User
4.3.8.30 Source register 15 Requested register communica‐
ted via Modbus.
65535 0 to 65535 User
4.3.8.31 Target register 15 Register of an existing product
parameter which the Modbus re‐
quest is redirected to.
65535 0 to 65535 User
4.3.8.32 Source register 16 Requested register communica‐
ted via Modbus.
65535 0 to 65535 User
4.3.8.33 Target register 16 Register of an existing product
parameter which the Modbus re‐
quest is redirected to.
65535 0 to 65535 User
4.3.8.34 Source register 17 Requested register communica‐
ted via Modbus.
65535 0 to 65535 User
4.3.8.35 Target register 17 Register of an existing product
parameter which the Modbus re‐
quest is redirected to.
65535 0 to 65535 User
4.3.8.36 Source register 18 Requested register communica‐
ted via Modbus.
65535 0 to 65535 User
4.3.8.37 Target register 18 Register of an existing product
parameter which the Modbus re‐
quest is redirected to.
65535 0 to 65535 User
Default settings
B.13 Communication
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 473