Siemens FC300 - Page 475

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
4.3.9.5 Fraction units Select fraction unit for the com‐
munication interface. Unit is not
applied at Local User Interface.
m³/h L/s, L/min, L/h, m³/
s, m³/min, m³/h,
m³/d, ML/d, Ugal/
s, Ugal/min, Ugal/
h, Ugal/d, BBPS,
BBPM, BBPH,
BBPD, BOPS,
BOPM, BOPH,
BOPD, ft³/s, ft³/
min, ft³/h, ft³/d, gal/
s, gal/min, gal/h,
gal/d, Mgal/d
User
4.3.9.8 Density units Select density unit for the com‐
munication interface (mass/vol‐
ume).
kg/m³ µg/L, µg/m³, mg/
L, g/mL, g/cm³, g/
L, kg/L, kg/m³, lb/
in³, lb/gal, lb/ft³,
STon/yd³
User
4.3.9.11 Temperature units Select temperature unit for the
communication interface.
°C °C, °F, °R, K User
4.3.9.12 Totalizer 1 unit Select Totalizer 1 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
kg g, kg, t, lb, STon,
oz, T
User
4.3.9.12 Totalizer 1 unit Select Totalizer 1 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
L L, hL, m³, Ugal,
BL, BB, BO, in³,
ft³, yd³, gal, bush
User
4.3.9.12 Totalizer 1 unit Select Totalizer 1 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
SL SL, Nm³, SL, Sft³,
Sm³
User
4.3.9.13 Totalizer 2 unit Select Totalizer 2 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
kg g, kg, t, lb, STon,
oz, T
User
4.3.9.13 Totalizer 2 unit Select Totalizer 2 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
L L, hL, m³, Ugal,
BL, BB, BO, in³,
ft³, yd³, gal, bush
User
4.3.9.13 Totalizer 2 unit Select Totalizer 2 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
SL SL, Nm³, SL, Sft³,
Sm³
User
4.3.9.14 Totalizer 3 unit Select Totalizer 3 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
kg g, kg, t, lb, STon,
oz, T
User
4.3.9.14 Totalizer 3 unit Select Totalizer 3 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
L L, hL, m³, Ugal,
BL, BB, BO, in³,
ft³, yd³, gal, bush
User
Default settings
B.13 Communication
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 475