Siemens FC300 - Page 492

Level 3 Level 4 Level 5
No. Name No. Name No. Name
2.4.3.8.8 Totalizers alarms
2.4.3.8.9 Device alarms
2.4.3.8.10 Channel 1 alarms
2.4.3.8.11 Input/output alarms (1)
2.4.3.8.13 Simulation alarms (1)
2.4.3.8.14 Simulation alarms (2)
2.4.3.8.15 Alarm class
2.4.3.8.16 NAMUR status signal
2.4.3.8.17 Polarity
2.4.3.8.18 On-delay
2.4.3.8.19 Off-delay
2.4.3.9 Digital input 2.4.3.9.1 Input function
2.4.3.9.2 CH1 forced current value
2.4.3.9.3 CH2 forced current value
2.4.3.9.4 CH3 forced current value
2.4.3.9.5 CH4 forced current value
2.4.3.9.6 Debounce time
2.4.3.9.7 Polarity
2.4.4 CH3 - relay 2.4.4.1 Operation Mode
2.4.4.2 Mode
2.4.4.3 Sensor alarms (group 1)
2.4.4.4 Sensor alarms (group 2)
2.4.4.5 Process alarms (1)
2.4.4.6 Process alarms (2)
2.4.4.9 Totalizers alarms
2.4.4.10 Device alarms
2.4.4.11 Channel 1 alarms
2.4.4.12 Input/output alarms (1)
2.4.4.14 Simulation alarms (1)
2.4.4.15 Simulation alarms (2)
2.4.4.16 Alarm class
2.4.4.17 NAMUR status signal
2.4.4.18 Polarity
2.4.4.19 On-delay
2.4.4.20 Off-delay
HMI menu structure
D.5 Menu item 2.4: Inputs and outputs
MASS 2100 & FC300 (FCT030)
492 Operating Instructions, 06/2017, A5E39789040-AA