Siemens FC300 - Page 77

3. Push cable through open gland and cable path
FS0032.01
4. Restore ferrule and tighten cap to lightly hold cable in place.
5. Connect ground to terminal and power to terminals L/+ and N/- in the manner shown
below at right using a screwdriver.
)


① L/
+
② N/
-
③ Protective Earth (PE)
AC connection DC connection
/
1
/
1
/
Power: 100 to 240 V AC, 47 to 63 Hz
/
1


/
Power: 19.2 to 28.8 V DC
Connecting
5.2 Connecting MASS 2100/FC300
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 77