192/617
Building Technologies Division User Manual LMS14... CC1U7471en
6 The settings in detail 07.05.2014
6.7.12 Operating mode changeover via input H
Line no. Operating line
1680 Optg mode changeover
None
Off
On
In the case of external changeover via inputs Hx, the operating mode where
changeover is to take place can be selected.
None
Function is deactivated. No changeover of operating mode.
Off
Operating mode is changed to Off.
On
Operating mode is changed to On.
Optg mode changeover
To Next Page
Loading...
Need help?
General
