Siemens LMS14 User Manual

467/617
Building Technologies Division User Manual LMS14… CC1U7471en
6 The settings in detail 28.01.2015
6.23.28 Device data
Line no. Operating line
6220 Software version
Line no. Operating line
6221 Development index
Line no. Operating line
6224 Device identification
Line no. Operating line
6225 Device family
The device family identifies the type of unit (LMS14 or LMS15).
If a data set from a different device family is imported into an LMS unit, the message
Incompatible data set is displayed.
Note!
It is not possible to import a data set from one device family into a different one.
Therefore, it may be necessary to create a separate data set for each device family
even if the data sets themselves are not device-specific.
Line no. Operating line
6226 Device variant
Line no. Operating line
6227 Object OV version
Line no. Operating line
6230 Info 1 OEM
This parameter shows the EEPROM storage capacity of the basic unit, which can be
freely used by the OEM by writing a numeric value for its own use. The parameter can
be displayed on the operator terminals and on tools/PC software.
Line no. Operating line
6231 Info 2 OEM
This parameter shows the EEPROM storage capacity of the basic unit, which can be
freely used by the OEM by writing a numeric value for its own use. The parameter can
be displayed on the operator terminals and on tools/PC software.
Line no. Operating line
6232 Parameter version
Line no. Operating line
6233 Parameter set number
Line no. Operating line
6234 Boil typ number OEM
Freely selectable boiler type number for OEM.
Software version
Development index
Device identification
Device family
Device variant
Object OV version
Info 1 OEM
Info 2 OEM
Parameter version
Parameter set number
Boil typ number OEM

Siemens LMS14 Specifications

General

Brand	Siemens
Model	LMS14
Category	Control Unit
Language	English