233/617
Building Technologies Division User Manual LMS14... CC1U7471en
6 The settings in detail 07.05.2014
If flue gas supervision takes effect, a status code or error code appears. Also, a forced
signal is delivered. If the boiler shuts down, fan overrun is started (Postpurge time TL
max (9541)). To ensure that there is no immediate response when the flue gas
temperature thresholds are exceeded for short periods of time, the acquired flue gas
Line no. Operating line
8318
Flue gas temp max
Note!
This slave pointer value cannot be reset!
Info/diagnostics
To Next Page
Loading...
Need help?
General
