503/617
Building Technologies Division User Manual LMS14… CC1U7471en
6 The settings in detail 28.01.2015
Display name
When selecting the data set, the display of the operator terminal shows a freely
selectable display name with a maximum of 16 characters (before the data set is sent)
(Pstick data description (7251)). The display name is assigned by the setup manager
(ACS435). The ACS432 PC software used for the transfer of data to the parameter
stick via the OCI432 docking station ensures that no more than one data set with the
same display name (e.g. XYZ123) will be stored on one and the same parameter stick.
This is to prevent confusion on the boiler since this information on the display is the
only information available.
To Next Page
Loading...
