534/617
Building Technologies Division User Manual LMS14… CC1U7471en
6 The settings in detail 28.01.2015
Line no. Operating line
[4507.1]
AdvWindStartSp
Speed below which adverse wind monitoring is active. Loss of flame must have
occurred previously for monitoring to be activated.
Line no. Operating line
[4508.1]
Adv wind target speed
Speed up to which modulation takes place as soon as ionization current limitation
comes into effect.
Line no. Operating line
[4777.1]
PrepurgOutpLimOEM
Prepurge output predefined by OEM (OEM limit).
Line no. Operating line
[4778.1]
IgnitionOutpLimOEM
Ignition load output predefined by OEM (OEM limit).
Line no. Operating line
[4779.1]
PartialLoad OutLimOEM
Low-fire output predefined by OEM (OEM limit).
Line no. Operating line
[4780.1] HF outp OEM limit
High-fire output predefined by OEM (OEM limit).
Line no. Operating line
[4781.1] Max output OEM limit
Maximum output predefined by OEM (OEM limit).
Line no. Operating line
[4782.1] Min output OEM limit
Minimum output predefined by OEM (OEM limit).
To Next Page
Loading...
