Siemens optiPoint 500 basic User Guide

Step by Step
Making multiline calls
100
100100
100
Picking up a held call
A colleague in an open-plan office has put a call on hold
on a line key and requests you (verbally) to take over the
call. Your telephone does not have a key for this line.
C
Lift the handset.
Select and confirm.
E
Enter the station number of the telephone at which the
call was held. You automatically pick up this call.
Forwarding calls for lines
If you activate call forwarding for a line that can also be
accessed at other telephones, the call forwarding func-
tion applies to all line keys belonging to this line.
Storing and activating station variable
call forwarding for a line
Press the line key, for example, for line 3235.
With the call forwarding key:
Press the key. The lamp lights up.
Press the key.
or Via the program/service key:
Press the key. The lamp lights up.
for Hicom 300 E/H (not used in US)
Confirm.
Select and confirm.
Then (in each case):
E Enter the destination number for call forwarding.
Confirm. The call forwarding is stored and at the same
time activated.
for HiPath 4000
The available types of variable call forwarding for every
line are identical with the call forwarding types described
above. Therefore, for all further steps see Æ page 69.
Direct call pickup?
Line
program/service
Call forwarding
program/service
Destinations?
Variable call forw.?
Save?

Siemens optiPoint 500 basic Specifications

General

Brand	Siemens
Model	optiPoint 500 basic
Category	Telephone
Language	English