Siemens optiPoint 500 basic User Guide

Step by Step
Making project calls
46
4646
46
Making project calls
External calls can be assigned to specific projects.
Precondition: Project numbers (from 1 to 5) have been
configured for specific projects and you have a code for
the project in question.
Setting up a project call
Press the key. The lamp lights up.
E
Enter a service code between 61 (for project number 1)
and 65 (for project number 5).
E
Enter the PIN.
or
Press the key. The lamp lights up.
Select and confirm.
Confirm.
or/possibly
Select and confirm PIN2 - PIN5.
and
E
Enter the external number.
Make your call in the usual way (Æ page 24).
program/service
program/service
PIN / COS?
PIN 1?
Project call mode is subject to a time limit. It is
deactivated automatically if you do not use your
telephone over a 5-minute period (for example).

Siemens optiPoint 500 basic Specifications

General

Brand	Siemens
Model	optiPoint 500 basic
Category	Telephone
Language	English