Siemens optiPoint 500 basic User Guide

Step by Step
Calling several persons simultaneously
30
3030
30
Station controlled conference
(HiPath 4000)
In a station controlled conference you can include up to
8 internal and external users. Users with system tele-
phones can execute or use all of the following func-
tions. ISDN telephones and external users are passive
users - they can only be included in an existing confer-
ence.
You can include users and conferences from a distant
system into your conference. The distant users can set
up and extend their own conference. The members of
this conference are included in your conference. But
they cannot execute or use the functions of your con-
ference.
The following functions are supported for all conference
members (except members of an included conference)
with a system telephone:
• Setting up a conference when calling a user or re-
ceiving a call or making a consultation call or receiv-
ing a second call.
• Accepting a waiting call and including the caller in
the conference.
• Toggling between the conference and a consulta-
tion call or waiting call.
• Holding a consultation call during a conference and
adding it to the conference.
• Interconnecting conference members from two in-
dependent conferences via a distant network.
• Putting the conference on hold, if line keys are in-
stalled.
• Receiving overview of all conference members.
• Transferring the conference to a new user.
The functions listed above can be carried out by all con-
ference members at the same time.

Siemens optiPoint 500 basic Specifications

General

Brand	Siemens
Model	optiPoint 500 basic
Category	Telephone
Language	English