Siemens optiPoint 500 basic User Guide

Calling several persons simultaneously
33
3333
33
Step by Step
Accepting a waiting call and adding it to the
conference
If you receive a waiting call during the conference (call
waiting function is activated), you can add this user to
the conference.
An alerting tone is audible. The lamp flashes. Press the
key. You are connected to the waiting caller. The confer-
ence is placed on hold.
Select and confirm to add the waiting caller to the con-
ference.
or
Select and confirm.
Select and confirm (used in US).
or
Select and confirm to release the waiting call and return
to the conference.
Transferring the conference
Any member can transfer the conference to a nonmem-
ber called using the consultation or expand conference
functions. The new user is not yet a member of the con-
ference. The conference cannot be transferred to a call-
er whose call is answered by a member using the Call
Waiting function.
You are taking part in a conference.
Select and confirm. The conference is placed on hold.
E Call a user.
or
Select and confirm.
E Call a user.
Announce that you are transferring the conference.
Select and confirm.
You are disconnected from the conference.
I Replace the handset.
Call pickup
Conference?
To g g l e / C o n n e c t ?
To g g l e ?
Release and return?
Consultation?
Add on to conference?
Transfer conference?

Siemens optiPoint 500 basic Specifications

General

Brand	Siemens
Model	optiPoint 500 basic
Category	Telephone
Language	English