Making multiline calls
101
101101
101
Step by Step
Storing and activating a station fixed call
forwarding destination for a line
Press the line key for the required line. The lamp lights up.
Press the key. The lamp lights up.
for Hicom 300 E/H (not used in US)
Confirm.
Select and confirm.
The fixed call forwarding destination for the line which
has already been stored is indicated on the display. If no
fixed call forwarding has been stored, "Nothing stored"
is displayed.
Confirm.
E
Enter the new call forwarding destination.
Confirm. Call forwarding for this line is stored and at the
same time activated. It applies to all line keys associat-
ed with this line.
for HiPath 4000
The settings for station fixed forwarding for every line
are identical with the call forwarding function described
above. Therefore, for all further steps see Æ page 67.
Reactivating station fixed call forwarding for
a line (without storing a different destination)
Press the line key for the required line. The lamp lights up.
With the call forwarding key:
Press the key. The lamp lights up.
Via the program/service key:
Press the key. The lamp lights up.
;> Enter the service code.
or
Select and confirm.
Select and confirm.
Confirm.
You will find further HiPath 4000 features onÆ page 67.
Line
program/service
Destinations?
Fixed call forw.?
New entry?
Save?
Line
Call forwarding
program/service
Feature settings?
Call forwarding?
Activate?
To Next Page
Loading...
Need help?
General