Making multiline calls
105
105105
105
Step by Step
Having the number of the called station
displayed
If the number of the station for which you (as a member
of a call pickup group) wish to pick up a call does not ap-
pear on the display, you can enter the code for "Display
on request" after lifting the handset. If you are not sure
of this feature access code, ask your system adminis-
trator:
C
Lift the handset.
After the code has been entered, the station number of
the telephone that has been called is displayed.
Taking a call in a hunt group
Calls are distributed to any idle member of a hunt
group.
Your telephone rings.
C
Lift the handset.
Temporarity removing station from
hunt group/
adding station to hunt group
Precondition: A hunt group has been configured in the
team.
You can disconnect yourself from the hunt group at any
time, for example, when you leave the office. You can
rejoin the hunt group as soon as you return to the office.
Press the key. The lamp lights up.
;= Enter the service code.
or
Select and confirm.
Select and confirm.
and
Enter the code!
You can still be contacted via your own number when
you have been disconnected from the hunt group.
program/service
Feature settings?
Hunting group?
Deactivate?
To Next Page
Loading...
Need help?
General