Siemens optiPoint 500 basic User Guide

Using a different telephone in the same way as your own
81
8181
81
Step by Step
Using a different telephone
in the same way as your own
You can log on to another telephone belonging to the
HiPath 4000 or Hicom 300 E/H system (not used in US)
via a personal identification number (PIN) (also tele-
phones of networked HiPath 4000 or Hicom 300 E/H
(not used in US) systems, for example, at other branch-
es of your company). At the other telephone you can*
then:
• make calls and assign the charges to cost centers
• make calls and assign the charges to specific
projects
• retrieve messages from your mailbox
• use your individual speed dialing numbers and also
a number that has been saved at your own tele-
phone for redialing
• use repertory dialing keys, provided that they are
configured in the same positions as your own tele-
phone
• enter timed reminders
Using an internal PIN, you can have your calls diverted
to a telephone in the office or department where you
will be for a temporary period (call forwarding - follow
me).
Logging on to a different telephone
Identifying yourself with PIN and dialing
Precondition: You have been assigned a PIN by your
system administrator. You require an internal PIN for
calls within your own HiPath 4000 or Hicom 300 E/H
(not used in US) system, while for calls involving other
HiPath 4000 or Hicom 300 E/H (not used in US) sys-
tems in the integrated network you require a network-
wide PIN.
Press the key. The lamp lights up.
?: Enter the service code
(61 for PIN 1, 62 for PIN 2, etc.).
or
Select and confirm.
program/service
PIN / COS?

Siemens optiPoint 500 basic Specifications

General

Brand	Siemens
Model	optiPoint 500 basic
Category	Telephone
Language	English