Siemens optiPoint 500 basic User Guide

Step by Step
Telephone settings
54
5454
54
Locking your telephone
You can prevent unauthorized persons from using your
telephone (and the telephone directory) during your ab-
sence.
Precondition: You have been assigned a personal iden-
tification number (PIN) by your system administrator.
Preventing unauthorized dialing:
Press the key. The lamp lights up.
?@
Enter the service code.
or
Select and confirm.
Select and confirm.
and
In the case of optiPoint 500 advance, optiPoint 500 ba-
sic, optiPoint 500 standard and optiPoint 500 standard
SL (only US) with chip card
reader: Insert the chip card. All lamps light up briefly.
Input is followed by the display:
"Executed".
Remove the chip card again.
program/service
PIN / COS?
Change COS?
Insert
chip card
Chip card
reader:
When the telephone is disabled in this way, a
special dial tone is audible when the handset is
lifted. Internally (within HiPath 4000), dialing is
possible in the usual way.

Siemens optiPoint 500 basic Specifications

General

Brand	Siemens
Model	optiPoint 500 basic
Category	Telephone
Language	English