Siemens SIMATIC MV440 - System setup via the Ethernet interface

Network and system interfacing
5.6 System setup via the Ethernet interface
SIMATIC MV420 / SIMATIC MV440
Operating Instructions, 04/2013, A5E02371045-06
105
5.6 System setup via the Ethernet interface
Acquisition and output of recognition values with Ethernet
Note
Power supply with "Power over Ethernet" (PoE)
The power IO RS-232 cable is not needed if the reader is supplied by PoE, for example
when connected to a SCALANCE X108 POE.
Note
PoE functionality not available for older devices
PoE functionality is not available for older devices with the following order numbers:
• 6GF3440-0CD10
• 6GF3440-0GE10
• 6GF3440-0CD11
• 6GF3440-0GE11
• 6GF3440-0CD21