Siemens SIMATIC MV440 - System Setup of the Reader as PROFINET IO Device and FB79 or Ident Profile

Network and system interfacing
5.4 System setup of the reader as PROFINET IO device and FB79 or Ident profile
SIMATIC MV420 / SIMATIC MV440
102 Operating Instructions, 04/2013, A5E02371045-06
5.4 System setup of the reader as PROFINET IO device and FB79 or
Ident profile
Acquisition and output of recognition values with a PROFINET IO device
Note
Power supply with "Power over Ethernet" (PoE)
If the reader is supplied by PoE, for example when connected to a SCALANCE X108 POE,
the power IO RS232 cable is not needed.
Note
PoE functionality not available for older devices
PoE functionality is not available for older devices with the following order numbers:
• 6GF3440-0CD10
• 6GF3440-0GE10
• 6GF3440-0CD11
• 6GF3440-0GE11
• 6GF3440-0CD21