Commissioning
8.4 Transferring optional licenses
SIMATIC MV420 / SIMATIC MV440
152 Operating Instructions, 04/2013, A5E02371045-06
Result
You have successfully transferred the license and the license is now available on the reader.
Note
If adjustment support was open during the transfer, you must reopen it for the license to
become visible in the adjustment support.
● Then terminate the connection to the reader ("Disconnect target system").
8.4.2 Removing a license
Note
Adjustment support open during transfer
If adjustment support was open during the transfer, you will need to reopen adjustment
support for change to become visible in adjustment support.
If a license is no longer required on a reader:
● Transfer the license from the reader to a different destination drive.
● The functionality according to the license is available only in demo mode after removing
the license.
To Next Page
Loading...
