Commissioning
8.4 Transferring optional licenses
SIMATIC MV420 / SIMATIC MV440
142 Operating Instructions, 04/2013, A5E02371045-06
8.4 Transferring optional licenses
8.4.1 Installing a license
Procedure
You can transfer an optional license to a SIMATIC code reader in three steps:
1. Installing the Automation License Manager
2. Install the MV plug-ins for code reader devices
3. Transfer a license to a SIMATIC code reader
Requirements
Note
Licenses are only transferable if they have been released for the target system
You can only successfully transfer licenses if they have been released for the target system.
You can, for example, transfer the Text-Genius or Veri-Genius license to the SIMATIC
MV440 reader but not a STEP7 license.
1. step: Installing the Automation License Manager
● Install the Automation License Manager (ALM) from the SIMATIC MV420/440 Product
CD-ROM (ALM\Setup ALM\setup.exe):
– If no Automation License Manager (ALM) is installed on your PC.
– If the ALM is older than V4.0 SP5.
● Follow the instructions in the setup program: Reboot the PC if necessary.
To Next Page
Loading...
