Commissioning
8.5 Selecting connection alternatives
SIMATIC MV420 / SIMATIC MV440
Operating Instructions, 04/2013, A5E02371045-06
155
Operating the reader in PROFINET mode
In PROFINET mode, you can:
● Connect the reader to the PC or programming device in your existing PROFINET IO
network.
● Integrate the reader as a device into a PROFINET IO network.
● Assign the reader the IP configuration of the PROFINET IO controller
Note
IP configuration cannot be set on the reader
The IP parameter settings for the reader are made in STEP 7. It is not possible to set the
parameters on the reader.
To Next Page
Loading...
