Operator control and monitoring
9.2 Working with the user interface
SIMATIC MV420 / SIMATIC MV440
172 Operating Instructions, 04/2013, A5E02371045-06
ASM
● Here, you set the baud rate for communication with a communication module (ASM). The
communication module provides options for interfacing, for example with PROFIBUS DP.
CustomGUI
You set the access rights of a CustomGUI for the Web API interface.
RS232
● Here, you set the parameters for the integrated RS232 port.
TCP
● Here, you set the parameters of the TCP/IP connection via which, for example, you can
send the result string.
Archiving/MMI
● Here, you enter the address of a server to which you send images and/or data records for
diagnostics.
● Enter a monitoring time after which the system will re-check for a connection between
reader and server after failure to establish a connection.
● You can also specify the address of a remote client that is allowed to perform the
functions described in "Remote client" (Page 324).
Note
Detailed description of parameters in the online help
For a detailed description of the parameters and possible values, refer to the online help.
To Next Page
Loading...
