Process interfacing via an automation system (PLC, PC)
10.7 Scanner portal application
SIMATIC MV420 / SIMATIC MV440
Operating Instructions, 04/2013, A5E02371045-06
321
Programs - Overall result
● The program format string on all readers must be "\02[CamId]\03%s\04".
– [CamId] can be selected freely and is used to identify the reader that read the 1D/2D
code in the field of view.
– "\02\03%s\04" is also valid if no identification of the reader is required when the result
is output.
To Next Page
Loading...
