Process interfacing via an automation system (PLC, PC)
10.8 Remote client
SIMATIC MV420 / SIMATIC MV440
328 Operating Instructions, 04/2013, A5E02371045-06
Response
● HTTP status code 200 (OK)
● Data:
– "2" -> XML upload and import were only partially successful.
The reader restarts. To obtain an error analysis, the XML import must be repeated
using the adjustment support.
– "1" -> XML upload and import was only successful.
The reader restarts.
– "0" -> Error importing.
To obtain an error analysis, the XML import must be repeated using the adjustment
support. The IN_OP bit is set and access using the adjustment support is permitted
again.
To Next Page
Loading...
